Banner
22
V. Banner
1. Switching on/off the receiver
You can switch on and off the receiver by pressing the top right red key
on the remote control.
Note
: just like a PC, switching on and off the receiver make some
complex operations to start.
Some seconds
may be needed before the
receiver reacts to this key press. Please,
don't press the red button
repeatedly
, otherwise the receiver may shut down again.
2. Programs selection
If your receiver doesn’t come with a pre-defined channel list, you should
perform one or more channel search in order to obtain a complete and
up to date channel list. See «Channel search» section.
a) Sequencial browsing
•
Use
5
6
keys on receiver front panel or...
•
…use
CH+
and
CH–
keys on the remote control to select next or
previous channel.
In the setup configuration menu you can build up your own favourite lists
you can easily recall to screen by the
RED
key.
b) Selection from a list
The
RED
key allows you to recall the
system channel list
. Further
RED
key pressed causes
favourite list
to pop up, if any.
•
use
5
6
keys to move cursor
up and down by one
;
•
use
34
keys to move cursor
left and right by one page
;
•
OK
selects the channel where the cursor is on.
•
use
CH+
and
CH–
to move cursor and select the channel at the
same time.
c) Direct selection...
... by pressing
0
to
9
keys on the remote control. Selected channel
number will be shown on receiver front display and on OSD.
Содержание Galaxis SX
Страница 2: ......
