Settings
12
left-side, named «Frequency».
•
Use the
p
q
keys to change the event period.
a.6) Event duration.
On the rightmost column, named «Duration», the time length –in
minutes- of the event is shown. The value is calculated as the difference
between the ending time and the starting time of the event, and it can not
be modified directly by the user.
b) Edit a timer.
To edit, partially or totally, a timer…
•
With the
p
q
keys, select the timer on the shown grid.
•
Press, and keep pressed for two seconds, the
OK
key.
Modifications are brought as described on points
a.1)
–
a.5)
.
c) Delete a timer.
•
With the
p
q
keys, select the timer to be deleted.
•
Press the
RED
key.
d) Help window
By pressing the
i
key, a windows appears with the instructions on how to
set timers. Press
OK
to close this window.
e) Exit the «Timer» section.
To exit the «Timer» section…
•
Press the
Exit
key.
Note:
Changes will be available after saving settings on main menu.
Important:
in order to turn on at the established time, the receiver must
be in «Stand-By» mode, that is, it must have been turned off from remote
control and
not
from front panel power button on the receiver.
5. Conditional Access
This receiver is ready for the vision of pay channels, of both subscription
and
pay-per-view
type. Despite there are numerous Conditional Access
systems being used, this receiver is virtually compatible with all of them
by means of the so-called CAM (Conditional Access Module). These
moduls, in PCMCIA standard format, handle the descrambling of the
Содержание Galaxis SX
Страница 2: ......
