background image

OPERATING SEQUENCE

The following is a description of component functions
during oven operation.

1. SETTING THE CLOCK

ex.) To set 4:30, touch number key [4],[3], and [0].   

NOTE: 1) This is a 12 hour clock.

2) Clock will operate as long as power is 

applied to the oven.

2. CANCEL FUNCTION

Touch the                           pad whenever you need to
cancel an entry or a function currently in use.
The display will either return to the last item entered
or to the clock. 

3. EZ ON

4. ONE TOUCH COOKING

NOTE: Heat only 1 package at a time

5. TIME COOKING

6. MULTI-STAGE COOKING

7. AUTO WEIGHT DEFROST COOKING

8. CHILD LOCK

This oven has a CHILD LOCK feature 

TO SET CHILD LOCK 

• Touch the                          pad
• Touch and hold STOP/CLEAR pad

LOCK

appear on the display.

TO CANCEL CHILD LOCK
• Touch the                          pad
• Touch and hold STOP/CLEAR pad             LOCK
disappears.

9. MORE / LESS

The cook time is adjustable by MORE pad or LESS
pad

10. CUSTOM COOK

You can program the cook time and power level by
using CUSTOM COOK pad.
ex) To set cook time 10 mine 30seconds, touch

number key [1],[0],[3], and [0]

4-2

STOP/CLEAR

CLOCK

NUMBER

STOP/CLEAR

POPCORN

STOP/CLEAR

EZ on

STOP/CLEAR

COOKING

MORE

STOP/CLEAR

COOKING

LESS

STOP/CLEAR

1ST STAGE

CLOCK

STOP/CLEAR

AUTO WEIGHT

DEFROST 

NUMBER OF

WEIGHT

START

STOP/CLEAR

CUSTOM

COOK

NUMBER

POWER

NUMBER

START

STOP/CLEAR

TIME

NUMBER

POWER

NUMBER

START

STOP/CLEAR

TIME

NUMBER

POWER

NUMBER

2ND STAGE

TIME

NUMBER

POWER

NUMBER

START

STOP/CLEAR

STOP/CLEAR

Содержание MA-1303BRV



















Отзывы: