21
HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect an antenna, a 75 ohm CATV cable, or
a VCR to the 75 ohm antenna terminal on the tread-
mill. See page 10 for instructions.
Follow the steps below to operate the television.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
13.
2. Turn on the television.
When you insert the key, the television will auto-
matically turn on. If you have turned off the televi-
sion, turn it on by pressing the On/Off button.
3. Press the Channel (CHAN.) buttons to select
the desired channel.
When the television is turned on, the screen will
show the last channel that was selected. To select
a different channel, press the Channel buttons.
The selected channel number will appear on the
screen for a few seconds. Note: The television is
equipped with a channel memorizing function that
allows you to go directly from the current channel
to the next channel saved in memory. Before chan-
nels can be selected in this way, they must be
saved in the television’s memory. See THE IN-
FORMATION MODE at the right.
4. Press the Volume (VOL.) buttons to adjust the
volume.
When you press either Volume button, the volume
level indicator will appear on the screen for a few
seconds. To temporarily mute the sound, press the
Mute button. Press the Mute button again to listen
to the television. Note: To use earphones or head-
phones (not included), plug them into the head-
phone jack on the console.
5. When you are finished using the television,
press the On/Off button.
Press the On/Off button to turn off the television.
Note: Removing the key from the console will also
turn off the television.
THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the television’s memory.
Follow the steps below to use the information mode.
1. Hold down the Stop button while inserting the
key into the console.
When the information mode is
selected, the upper part of the
right display will show the total
number of miles or kilometers
that the walking belt has
moved, and the lower part of
the display will show the total
number of hours that the
treadmill has been used.
In addition, the right display will show the letter “E”
for English miles or the letter “M” for metric kilome-
ters. Press the Speed increase button to change
the unit of measurement if desired.
Note: The console features a display demo mode,
designed to be used if the treadmill is displayed in
a store. While the demo mode is turned on, the
console will function normally when you plug in the
power cord, switch the circuit breaker to the reset
position, and insert the key into the console.
However, when you remove the key, the displays
will remain lit, although the buttons will not func-
tion. If the demo mode is turned on, a “d” will ap-
pear in the display while the information mode is
selected. To turn on or turn off the demo mode,
press the Speed decrease button.
2. Press the On/Off button and adjust the bright-
ness, contrast, color, sharpness, and/or hue of
the television.
A few seconds after you press the On/Off button, the
brightness level indicator will appear on the television
screen. Press the Volume buttons repeatedly to ad-
just the brightness setting if desired.
Next, press the Channel buttons repeatedly until the
contrast, color, sharpness, or hue level indicator ap-
pears. Adjust each setting, if desired, by pressing
the Volume buttons.
