Gold's Gym GGSY24613.3, Руководство пользователя

Страница: 14 / 36

14
12. Apply grease to an M10 x 77mm Bolt (79).
Orient the Pivot Frame (5) so that the welded
pins are on the side shown. Attach the Pivot
Frame to the Top Frame (4) with the M10 x
77mm Bolt (79) and an M10 Locknut (56).
Do
not overtighten the Locknut; the Pivot Frame
must pivot easily.
Attach the two Arm Pins (40) to the Pivot
Frame (5) with two M4 x 19mm Self-tapping
Screws (69).
Insert the Arm Pins (40) into the two holes in the
Upper Upright (3).
12
Grease
Holes
5
56
79
69
69
3
40
40
Pins
4
13. Apply grease to an M8 x 50mm Shoulder
Bolt (66).
Attach a Cable Pivot (39) to the Left Arm (10)
with the M8 x 50mm Shoulder Bolt (66) and an
M8 Locknut (58).
Next, wet the inside of a Large Foam Pad (42)
with soapy water. Slide the Large Foam Pad
onto the Left Arm (10).
Then, attach a Handle (11) to the Left Arm (10)
with two M10 x 25mm Button Bolts (77) and two
M10 Washers (57).
Assemble the Right Arm (9) in the same way.
13
11
10
39
57
77
66
58
9
42
Grease