9
7.
See the inset drawing.
Locate the T-handle
(25) on the Seat Carriage (7).
Pull the T-handle (25) outward as far as possi-
ble and slide the Seat Carriage (7) onto the
Seat Frame (1).
Release the T-handle (25), and slide the Seat
Carriage (7) forward or backward until the T-
handle engages one of the adjustment holes in
the Seat Frame (1).
Attach the Front Leg (3) to the Seat Frame (1)
with four M8 x 55mm Bolts (46) and four M8
Locknuts (52).
Do not tighten the Locknuts
yet.
7
3
46
46
1
7
52
52
6. Orient the Seat Frame (1) so that the hexagonal
holes are facing the floor.
Attach the Seat Frame (1) to the Crossbar (2)
with two M10 x 55mm Bolts (53), two M10
Washers (41), two M10 Locknuts (40), an M10
x 60mm Bolt (51), and an M10 Locknut (40).
Do
not tighten the Locknuts yet.
6
2
41 40
41
40
53
51
53
Hexagonal
Holes
1
7
25
