Goldmund TELOS 352, Руководство пользователя

Страница: 14 / 15

GOLDMUND TELOS 352 - Universal Stereo Power Amplifier - 14
8 TECHNICAL DATA
SAFETY FEATURES SAFETY FEATURES SAFETY FEATURES SAFETY FEATURES
•
AC voltage fuse: 16 A slow-blow
•
Over-heating: the amplifier stops when heat sink temperature exceeds 80°C
•
Overload: Amplifier stops when output current exceeds 25A peak
•
HF protection: Amplifier stops when oscillations are detected on output
•
DC protection: Amplifier stops when continues signal (DC) is higher than 5Vdc on
output
FRONT PANEL CONTROLS FRONT PANEL CONTROLS FRONT PANEL CONTROLS FRONT PANEL CONTROLS
•
1 control key (ON/OFF)
•
Red led display for over-heating, DC offset or HF protection and overload
•
Green led display for Power ON, operating mode
•
Orange led display for signal connection and digital lock (blinking in standby)
REAR PANEL CONNECTORS AND CONTROLS REAR PANEL CONNECTORS AND CONTROLS REAR PANEL CONNECTORS AND CONTROLS REAR PANEL CONNECTORS AND CONTROLS
•
Universal socket 3 lugs with main fuse (16 A slow-blow)
•
USB Connector will provides access for future optional DSP board
•
Output speaker 2 x 5 ways post in parallel
•
Output speaker 2 x Coaxial connectors in parallel
•
2 x Digital Spdif input and output RCA connector (Alize 6 D/A converter)
•
2 x Switch right or left channel selection from the Spdif input
POWER POWER POWER POWER
•
Maximum power (IEC60065): 300 Wrms on 8 Ω / 1%THD
•
Rated power consumption (IEC 60065 at 8 Ω ): 180 W.
•
Maximum power consumption: 490 W.
•
Nominal line voltage: 117, 234 V (selectable internally)
•
Input voltage range: +/- 10 %
•
4 toroidal transformers