GOLDMUND TELOS 250+ - Universal Power Amplifier - 10
5
5
5
5
A
A
A
AMPLIFIER CONTROLS (Ctd.)
MPLIFIER CONTROLS (Ctd.)
MPLIFIER CONTROLS (Ctd.)
MPLIFIER CONTROLS (Ctd.)
5.2
MANUAL OPERATION
On the front panel of the GOLDMUND TELOS 250+ amplifier you will find only one
POWER key.
When first connected to mains power the green led will flash (equal time on and off) for
around fifteen seconds whilst the amplifier goes through the POWER UP sequence. At the
end of this sequence, the amplifier enters in STANDBY mode. The green led flashes
slowly.
Once in STANDBY mode, a short key press (<1 second) switches the amplifier ON. The
green led is permanently illuminated in this mode.
If the digital input is used, the yellow led is lit, showing the amplifier is locked. If the digital
input is not used, the amp remains muted until a lock is found. With an analog input, the
amp is immediately operational and the yellow led is always illuminated.
The amp may be returned to STANDBY mode with a short key press.
If an error is detected the red led will be illuminated. Once the cause of the error has been
removed, the amplifier can be returned to STANDBY mode with a long key press.
These security features are provided to reduce the risk of accidental POWER ON or
POWER OFF and to protect the amplifier in ERROR mode.
