User Manual – Goldmund Mimesis 22M
Power Amplifier
4
4 CONNECTIONS
Connect the power cord to the back of the amplifier and plug it in the nearest wall
plug. Use only a 3 lugs grounded plug, for safety reasons. To get the best sound
of the amplifier, avoid any multiple plug or extension cord.
NOTE: See below for the proper selection of the power cord receptacle,
depending of the line phase.
Connect the interconnects between the preamp and the power amp. You may
either use the RCA female sockets, which are the highest quality WBT sockets
(ground connects first and the plug may be locked if you use the GOLDMUND-
MIT interconnects), or the XLR. The XLR sockets, especially useful in
professional installations, are wired as follows:
1 - Grounding, Shielding.
2 - Hot.
3 - Cold.
Attention : if you want to use a symmetrical 4 wire cable, always maintain
the ground/earth switch to "Link" or you may destroy your amplifier.
Connect the speaker cables to the red and black terminals accessible in the back
of the amplifier, or, if you use a Goldmund High Definition speaker cable, you can
connect directly the speaker cables to the coaxial plugs on the back panel of the
amplifier, bypassing the amplifier adapter module of the speaker cable.
You may notice that the ground of the input plug and the black speaker terminal
are the same polarity. The amplifier is non-inverting in phase.
