GOLDMUND EIDOS 17 – Universal Player -
8
5
POWER CONNECTION
Plug the AC power cord to the back of the Eidos 17 and in a wall socket. Switch
the back power switch to “ON”. The front display will light up as soon as you will
press “OPEN” button on the front panel or when pressing the remote control
“POWER” button, indicating that the unit is powered on.
Unplug the power cord if you are not going to use the player for an extended period
of time. Hold the power plug when unplugging. Do not pull on the cord.
6
BACK PANEL CABLE CONNECTIONS
6.1
VIDEO CONNECTIONS
The Eidos 17 offers 2 different types of video signal output:
• HDMI VIDEO OUTPUT
• DIGITAL VIDEO OUTPUT
There are two HDMI output connectors; we recommend using the HDMI 1 for
video and HDMI 2 for audio.
This configuration is required to offer the best video quality.
NOTE
The Eidos 17 uses the HDCP stands for
High-bandwidth Digital Content Protection
in HDMI connection. T
o prevent copying of
digital audio and video content as it travels
across connections
HDCP encrypt the digital audio and video
content. The TV must support HDCP in
order to decrypt and properly display the
content.
NOTE
In all system and specially in HDMI
wiring, to guarantee the HD signal
throughout the full system, Goldmund
recommends to perform all the wiring
when all units are turn off and
successively
turn
on
the
units
according to the following combination:
screen,
acoustic
processor
or
preamplifier and finally the player.