Goldmund EIDOS 1080p, Руководство пользователя

Страница: 23 / 32

Goldmund Eidos 1080p Owner manual
p23
13. USING THE PROJECTOR
After setting-up, switch on all equipment.
The projector can be controlled by the keypad on the rear, by the remote control or using the RS232 or LAN
interfaces.
To switch the projector on, firmly press the POWER button on the keypad or the remote control. The STATUS
indicator will turn from yellow to green when the unit is switched on. The keypad will light up so that all
available functions are yellow. Functions not available will have no light. Selected functions will turn green.
If the STATUS indicator is flashing yellow, please wait until it turns permanent yellow.
To switch the projector off, firmly press the POWER button on the keypad or the remote control twice (to
confirm that you really want to switch off the unit). The STATUS indicator will turn from green to flashing
yellow, then yellow when switched off.
You may not switch the unit on while the STATUS indicator is flashing yellow. Please wait until the indicator is
permanent yellow.