Goldmund EIDOS 1080p, Руководство пользователя

Страница: 13 / 32

Goldmund Eidos 1080p Owner manual
p13
6. INDICATORS
STATUS
Indicates the overall system status by green, yellow and red colors.
PERMANENT GREEN LIGHT
The projector is turned on and in normal operation.
PERMANENT YELLOW LIGHT
The unit is in standby mode; no source(s) connected, or the source(s) connected are inactive or switched off,
thereby activating the power-save function (DPMS). You may enable or disable the power save function in the
SET UP sub menu, DPMS on or off.
FLASHING YELLOW LIGHT
Please wait. The yellow light will flash a period after power cord is connected (10-15 sec.), and a period after
going to standby mode while lamp is cooling down (approximately 45 sec.). The projector may not be turned
on again until the light has turned to permanent yellow.
FLASHING RED LIGHT
Projector is overheated. Turn off immediately! Check if air inlets are covered or if ambient temperature is
outside specifications. The projector cannot be restarted unless the power cord is disconnected and
reconnected again.
If the projector continues to flash red, you will need to return the unit for service.
LAMP 1, LAMP 2
Indicate the status of each lamp by green and red colors.
PERMANENT GREEN LIGHT
The lamp is on and in normal operation.
PERMANENT YELLOW
The lamp is ready and in standby mode
FLASHING YELLOW
Please wait. Lamp is cooling down.