Goldenote AP 7, Руководство пользователя

Страница: 5 / 12

5
AP-7
Italian 30 Watt Integrated Amplifier
(Operating Conditions)
The AP7 has been designed for use in Hi-Fi systems in sheltered locations. It ought therefore to be protected from any
eventual variations in temperature and humidity. Avoid to use the unit close to radiators or other strong heat sources,
electrical and electronic motors, switched on mobile phones etc.
The location in proximity of other audio components is not theoretically critical, but you should nevertheless pay attention
to this. In any case, take care to unplug completely the unit every time you need to move it, or to move the turntable on
which it is installed.
AP 7 Front Panel
o
(9) ON/OFF - Master switch, it turns the unit ON/OFF completely.
o
(10) VOL – Turn the volume of the unit down.
o
(11) VOL + – Turn the volume of the unit down. Pressing the (10) & (12) buttons
together the unit changes the input selection L1, L2, L3, L4.
Pressing and holding together for 5 seconds the Key (10) and (12) it switches
internal or optional external power supply.
o
(12) MUTE – To activate only from the remote from P1 button
o
(13) HEADPHONE – Headphone activation input. To activate only from the remote
from P1 button.
o
(14) VOLUME/INPUT DISPLAY – The display shows the Input selected and for 5
seconds the volume position when activated.
o
(15) HEADAPONE SOCKET – 6.3mm Headphone socket
o
(16) BLUE LED Light – It shows the unit ON/OFF
o
(18) RED/(Blank)GREEN LED Light – With RED light ON the unit is powered by the
internal power supply. With Green light ON then unit is powered by optional
external power supply.
o
PLEASE NOTE: When the unit is thermally stabilized the ON Red light feds down.
Operating Conditions