GoldenEar Technology SuperSub XXL Скачать руководство пользователя страница 8

SuperSub XXL Owner’s Manual 

GoldenEar Technology

8

SuperSub XXL Manual

Subwoofer Connection 

We recommend the use of high-quality cables and connectors when hooking up your subwoofer 
(see your dealer).

INPUT/OUTPUT FACILITIES

Left/LFE Line-Level (RCA) Input – 

Allows connection from the Sub/LFE Output of an A/V receiver, processor or 

other suitable low-passed, low-level source.

Left and Right Line-Level (RCA) Inputs – 

Allows connection from the Left/Right preamp outputs of your receiver 

or processor, or integrated amplifi er, for use in a stereo (rather than home theater) system.

CONTROL FACILITIES

Your GoldenEar Technology SuperSub XXL subwoofer is equipped with operating controls on the back panel to 

ensure excellent fl exibility and maximum performance in any installation. Most of them are the “set and forget” 
type, although you may occasionally fi nd certain controls require minor adjustments.

Subwoofer Level – 

This is a volume control, use it to balance the subwoofer output level to best blend with your 

other speakers. For suggestions on setting the Subwoofer Controls once your subwoofer has been connected 

refer to the section on “Fine Tuning” on page 13.

Crossover Control – 

Controls the subwoofer’s upper-frequency cut-off. This control (low-pass fi lter) is continuously 

variable between 40 and 150 Hz. This low pass fi lter control is used to obtain the optimum transition between 
the subwoofer and your main speakers 

when the subwoofer is connected using the Left/Right Inputs and the input 

switch is selected for Left/Right input use (see fi gure below). 

We receive many questions from subwoofer owners 

asking us where to set the fi lter controls in a variety of different setups. Although many people think that there is a 

specifi c frequency at which to set the controls in their system, this can only be determined by you. Experimenta-

tion is recommended (due to system placement and subjective variables) to obtain the best sound for you. See 
the “Fine Tuning” section on page 13 for some suggestions.

8

IMPORTANT: To achieve all the superb bass performance
that your SuperSub subwoofer is equipped to offer, it is 
important that you become familiar with its comprehensive
Input/Output and Control Facilities. Before connecting your 
subwoofer, read the following sections carefully.

Содержание SuperSub XXL

















Отзывы: