SuperSub XXL Owner’s Manual
GoldenEar Technology
8
SuperSub XXL Manual
10
Connection
Options
Before connecting your subwoofer, please read this section to determine which setup option best suits your
needs. (See your dealer if you require additional information or assistance.)
Left/LFE Line-Level Input From Sub/LFE Output –
For use with a receiver, processor or subwoofer control unit that
has a Sub-Out/LFE-Out jack - Using an RCA-to-RCA interconnect cable connect the subwoofer to the Left/LFE In-
put and position the Input Switch in the LFE IN (Down) position, as shown below. Most a/v receivers, preamps and
processors feature a mono (line level) Sub/LFE output intended to be used with subwoofers. You can feed this
Sub/LFE output of your a/v receiver or processor to the LFE input on the subwoofer and achieve full performance.
These outputs have their own low-pass fi lter built into the circuit as part of their bass management setup. The LFE
input on your SuperSub subwoofer are
direct coupled inputs which are not affected by the subwoofer’s crossover
control (low-pass fi lter)
. If the sub output on your receiver is full range (does not have a low-pass crossover - or you
wish to use the SuperSub’s subwoofer’s low-pass crossover), then you must hook up using the Left/Right Inputs, as
described in the section on page 11.
Left
