background image

Buzzaround Owner’s Manual - 

Updated 092605

 

Page 16

RIDING YOUR BUZZAROUND

 

 
5.  Place your hands on the handgrips. 

• 

If you wish to drive forward, position your right thumb on the right 
thumb lever and push forward. 

• 

If you wish to drive in reverse, position your left thumb on the left 
thumb lever and push forward. 

6. Press against the thumb lever to gently accelerate your Buzzaround

.

 

7. Release the lever to allow your Buzzaround to come gently to a full stop. 
8. Practice these two basic functions until you feel that you have control of your              
    scooter. 
 
Steering  
Steering your Golden Buzzaround is easy and logical. 

1.  With both hands on the handgrips of the tiller, turn the tiller to the right to 

travel to the right. 

2.  With both hands on the handgrips of the tiller, turn the tiller to the left to 

travel to the left.    

3.  Make certain to maintain sufficient clearance when turning your scooter so 

that the rear wheels will clear any obstacle. 

 

WARNING:  TURNING TOO SHARPLY AROUND A CORNER CAN CAUSE THE SCOOTER 
TO TIP.  AVOID THIS DANGER AT ALL TIMES BY STEERING A WIDE ARC AROUND 
CORNERS AND OBSTACLES.  ALSO, TO AVOID THE RISK OF TIPPING, REDUCE SPEED 
BEFORE NEGOTIATING ANY TURNS.    

 
Steering in a tight spot 
If you must steer in a tight spot, such as entering a doorway or when turning 
around:   

1.  Bring your Buzzaround to a full stop. 
2.  Turn the speed control dial to the slowest setting 

(Fully counter clockwise)

 

3.  Turn the tiller to the direction in which you wish to drive. 
4.  Press gently on the appropriate thumb lever and slowly turn your 

Buzzaround. 

 
For more information on dealing with obstacles and tight spots, see “Control 
through tight spots” on the next page. 
 
Steering in Reverse 
Backing up your Buzzaround requires attention to what you are doing 

1.  Use your left thumb to press against the left thumb lever. 
2.  Turn the tiller to the left to drive in reverse to the left. 
3.  Turn the tiller to the right to drive in reverse to the right. 

 
Note:  Your Buzzaround speed in reverse is fifty percent of the maximum speed 
set at the speed control dial.     
 

 

 

Содержание GB 101













































Отзывы: