Golden Companion, Руководство по обслуживанию

Страница: 21 / 29

WWW.GOLDENTECH.COM info@goldentech.com PAGE - 21
Figure 22. Drive Wheel Axle Key
MOTOR BRUSH REPLACEMENT
Tools needed: Slotted screwdriver
1. Place the freewheel lever in the engaged position.
2. Remove the key from the key switch.
3. Remove the seat.
4. Remove the rear shroud.
5. Remove the motor brush cap. (See #1 on figure 21.)
6. Remove the brush.
7. Install the new brush.
8. Reinstall the motor brush cap.
9. Repeat for the other brush.
10. Reinstall the rear shroud.
11. Reinstall the seat.
DRIVEWHEEL REPLACEMENT
Tools needed: 19mm socket, frame blocks.
1. Place the freewheel lever in the engaged position.
2. Remove the key from the key switch.
3. Place the rear of the scooter onto blocks.
4. Remove the nut and washer that fastens the wheel to
the axle. Make sure you retain the axle key. (See #1
on figure 22.)
5. Place a new wheel onto the axle. Make sure that the
axle key is reinstalled in its original position.
6. Reinstall the wheel cover and wheel hardware.
7. Tighten securely.
BATTERY REPLACEMENT
Tools needed: Phillips screwdriver, adjustable wrench
1. Place the freewheel lever in the engaged position.
2. Remove the key from the key switch.
3. Remove the seat.
4. Remove the shroud.
5. Remove the velcro strap.
6. Unplug and remove the battery.
7. Remove the battery harness. (See #1 on figure 23.)
8. Reinstall the battery harness onto the new battery.
Tighten the harness hardware securely.
9. Place the new battery onto the frame.
10. Plug the battery harness into the battery connector.
11. Secure the battery and the harness with the Velcro
strap.
12. Reinstall the shroud.
13. Reinstall the seat.
Figure 21. Motor Brush Cap
1
Figure 23. Battery Harness
1
1