7
Figure 5. Controller
Component:
Contr oller
-
#4
Location:
Mounted inside the deck under the r emovable contr oller cover .
See figure 5.
Function:
Contr ols and monitor s the system. Uses a series of beeps/flashes when something in the system is out
of range.
Connections:
Connected to the main har ness (5), char ger & inhibit, br ake, motor (M
-
M+), battery (B
-
B+).
See
figure 3.
Refer to the wir ing diagram on page 11.
Failure Signs:
Beep Code #9. No power to the control panel or the motor .
Tests:
Test for voltage coming into and out of the contr oller .
Expected readings:
Battery voltage (24
-
29VDC).
Serviceable:
Replace as necessar y.
Component:
Main Har ness
-
#5
Location:
Inside the dash and the plastic upper/lower body halves.
See figures 5 and 6.
Refer to the wiring
diagram on page 11.
Function:
Provides connectivity for the tiller components and the contr oller.
Connections:
Connected to the controller , and contr ol panel. Refer to the wiring diagr am on page 11.
Failure Signs:
Scooter will not r un.
Tests:
Test for voltage and continuity. Check connectors. Make sure the pins ar e not corr oded and ar e seated
properly.
Expected readings:
Battery voltage (24
-
29VDC). Continuity (less than 10 ohms).
Serviceable:
Replace as necessar y.
Figure 6. Main Harness (Shown Separated)
Main
Harness
C
ha
rg
er
&
inh
ibi
t
B
ra
ke
M
-
M+
B
at
-
B
at+
Fuse
Spare Fuse
UPPER HARNESS
LOWER HARNESS
Содержание Buzzaround Carry On
Страница 2: ...2 ...
