Golden Technologies Buzzaround XL GB116, Руководство по обслуживанию

Страница: 8 / 96

Buzzaround XL_SG_REVA_100711
7
Component:
Front Intermediate Motor Harness (8)
Location:
Mounted on the front frame.
See figure 6.
Function:
Provides connectivity for rear intermediate motor
harness and the controller.
Connections:
Connected to the rear intermediate harness (9a)
and the controller (6). Refer to figure 11 on page 10.
Failure Signs:
Scooter will run slowly or not at all.
Tests:
Test for voltage and continuity. Check connectors.
Make sure the pins are not corroded and are seated properly.
Expected readings:
Continuity (less than 10 ohms).
Serviceable:
Replace as necessary.
Component:
Rear Intermediate Motor Harness (9)
Location:
Mounted on the rear frame.
See figure 7. Figure 6. Front Intermediate Harness
Function:
Provides connectivity for front intermediate
motor harness and the motor/brake assembly.
Connections:
Connected to the front intermediate motor
harness (8a) and the motor/brake assembly (10a).
Refer to figure 11 on page 10.
Failure Signs:
Scooter will run slowly or not at all.
Tests:
Test for voltage and continuity. Check connectors.
Make sure the contacts are not corroded.
Expected readings:
Continuity (less than 10 ohms).
Serviceable:
Replace as necessary.
Component:
Motor/Brake Assembly (10)
Location:
Mounted on the transaxle.
See #1 on figure 8.
Function:
Drives the scooter.
Connections:
Connected to the rear intermediate motor
Figure 7. Rear Intermediate Harness
harness (9b) and the brake (11a). Refer to figure 11 on page 10.
Failure Signs:
Scooter runs slowly or not at all.
Tests:
Test for internal resistance in motor. Test motor
wires for continuity. See Beep Codes #5 and #8.
Expected readings:
Internal motor resistance is less than 50
ohms but not shorted.
Brake resistance is less than 80 ohms but not shorted.
Serviceable:
Replace the motor/brake assembly.
Component:
Brake (11)
Location:
Mounted on the end of the motor.
See #2 on figure 8.
Function:
Keeps the motor from moving when the power is off.
Connections:
Connected to the motor harness (10b). Refer to
figure 11 on page 10.
Failure Signs:
Scooter runs slowly or not at all.
Tests:
Test for internal resistance. See Beep Code #5 on page 14
and Beep Code #8 on page 17.
Expected readings:
Brake resistance is less than 80 ohms but
not shorted.
Serviceable:
Replace the park brake.
Figure 8. Motor/Brake Assembly
1 2