Golden Alero GP52SS Owner’s Manual
Revised 0807
11
ASSEMBLY
Your Golden Alero is a fully foldable power wheelchair. It has been designed to be assembled
with minimal effort or difficulty. Should you not understand the procedures outlined below or
have difficulty assembling your Alero, please contact your Golden Authorized Dealer for
assistance.
1.
Unfold your Alero by holding the two arm rests with your hands and pushing outwards
to extend frame. (Fig. 2)
2.
Push down on seat rails to ensure the seat opens fully and locks into the receivers on the
wheelchair side frames. (Fig. 3)
Fig. 2
Fig. 3
3.
Raise the folding back and lock it into position. (Fig. 4)
4.
Attach the bottom of the backrest under the bottom of the seat using the Velcro®
provided.
5.
Slide the Power Control / Joystick arm into the mounting bracket under the armrest and
tighten it. The cable should run on the outside of the clothing guard. (Fig. 5)
Fig. 4
Fig. 5
Note: The Joystick Controller can be mounted on either side of your power wheelchair. We
suggest you contact the Golden Authorized Dealer you purchased your Alero from
should you wish to change it.
