31
Step 15: Install Receiver, Battery & Switch:
You will need a 4 or 5 channel receiver; 4.8 or 6.0 Volt, 1100 mAh battery and a
electrically compatible switch; Velcro strips, Foam Rubber, rubberbands, # 11 blade.
Attach Switch:
Thread the switch leads through the hole and position
the switch so that the “ON-function” would be forward.,
(i.e. to
turn the switch on, slide the switch handle forward)
.
Attach Switch:
Place the switch backplate in place and screw the
switch into position using the hardware provided with the
switch.
Install Battery Switch:
Install the switch on the fuselage side opposite the
muffler discharge. Generally, this will be the left side. Using
the switch backplate, mark the switch outline location on
either inside or outside of the fuselage; whichever is more
convenient.
Cut a hole in the fuselage where you have marked the
outline. (Double-up or backup the fuselage side with 1/16”
scrap balsa if you wish.)
Install the Receiver Base:
Installation of a “Receiver-Base” is optional as the
receiver may be attached in several different ways to the
fuselage skin or bulkheads.
Using a “lightened” scrap piece of 2” x 2-9/16” lite-ply,
glue it to the 1/4” stringer and F3 and F4. as shown left.
Attach two strips of Velbro© to the receiver base.
Содержание CROSSFIRE 320E
Страница 48: ...48 ...
Страница 49: ...49 Notes ...
Страница 50: ...50 This Page intensionally left blank ...