GM Electronics Ltd.
Golden Mask Deep Hunter pro2 – Instruction Manual
14
7.
Keeping permanent height above surface during the search will ensure
optimal functioning of the systems to eliminate the influence of ground and thus
the maximum depth of detecting metal objects.
8
. Do not use (or leave) the detector in a humid environment, wet bushes, snow
and/or water – it cannot work stability and can be damaged electronic block
(not sealed) and built-in battery. When you connect the antenna to the
electronics must prevent the ingress of water or moisture in and around the
contact pins of the connectors.
9.
Work with the detector in industrial areas and places with a large amount of
scrap metal in the soil, and presence of industrial electromagnetic interference
can manifest instability and/or inability to work. This necessarily requires
reducing the sensitivity of the device with the potentiometer
"SENSITIVITY"
,
which will reduce the depth of detection, but this is the only way to achieve
stability and demand in such conditions.
10.
After extensive work with the detector, suggesting repeatedly accession and
separation of the antenna may appear defect connectors, which is why these
activities should be carried out very precisely and carefully. Contact points
should be kept clean and dry.
11.
If after lifting the antenna from the ground indicator
"SIGNAL"
show a
negative value (arrow deviates to the left of zero), this means that under the
antenna was metallic object during the preparation of the unit to work.