GM Electronics Ltd.
Golden Mask Deep Hunter pro2 – Instruction Manual
13
NOTES:
1.
After the initial ground balance was done the value of potentiometer
"GROUND"
may be increased to one - two graduations on the scale. This
setting is made more "rough" sensitivity of the device and depth decreases
slightly, but achieved greater stability and higher accuracy readings of the
system to recognize the type of metal.
2.
During the initial setup ground balance do not switch the detector in
"silent"
mode!
3.
Use the further gain of the received signal
"BOOST"
requires mandatory
doing a new initial setup.
4.
If at work appear random disturbances or prolonged change the frequency of
the sound signal (false signals) - must be pressed briefly
"RETUNE"
.
This action can be repeated several times until no interference to carry out a
new initial setting in "manual ground balance" or reduce the sensitivity and/or
exclude additional signal amplification
"BOOST"
in "automatic ground
balance" (item 4).
5.
When switch "Off" detector can be observed for some time lights LED
"Battery!"
. This is not a problem with the battery. Only when this indicator
lights up when turned "On" (running) machine, then you should proceed to
charge the built-in battery.
6.
To maximize the potential of the device during operation it is advisable to
pressure short
"RETUNE"
from time to time.