Golden Designs DYN-HTR-1500-200, Руководство пользователя

Страница: 8 / 13

8
(Note: To set back to factory settings, hold down the TIME button for (5) seconds. This will
set all values back to default.)
7) The Dynamic Infrared Heater can be turned off by pressing the POWER button. DO NOT
TURN OFF THE MASTER POWER SWITCH ON THE REAR OF THE HEATER OR
UNPLUG THE HEATER UNTIL THE FAN SHUTS DOWN. If the heater is left on using the
TIME function, there will be (5) second sound alert to let you know that the time is expiring.
If no actions are taken, the heater will shut off.
Recommendations for Maximum Performance
1. Be sure not to place the heater in an area where the air flow or air movement is great.
2. Direct the outflow towards the center of the room and not against a solid structure, like a
wall for example. For larger areas, place the heater within a central location.
3. The Dynamic Infrared Heater is designed for maximum efficiency in the 68
0
F to 74
0
F range.
This is because of the ambient air moving through the heater and out constantly.
4. Existing HVAC heating system vents should be closed. This allows the heater to function in
an isolated area.
5. It is not recommended to operate heater in areas exposed to non-insulated concrete or
metal walls. Concrete floors should be covered to insulate the heat within the room.
6. If the heater filters become dirty or dusty, they must be cleaned for the heater to operate at
its maximum efficiently.
Care, Maintenance, and Storage
Before care or maintenance is applied, always unplug the cord from the receptacle. The cabinet
housing can be wiped down with water and a damp cloth or with furniture polish. The heater has a
washable filter. The filter should be cleaned regularly to provide for maximum performance. Once
the filter is removed, run warm water through and over the filter to remove dirt and dust. Shake all
water residue from the filter and replace it back in the heater. (Note: A mild soap can be applied to
assist in removing dirt and dust from the filter)
If the heater is not to be used for an extended period of time, it can be stored away. Make sure the
power is turned off and the cord is unplugged from the receptacle. Wrap the cord around the
handle on the rear of the portable heater. Cover the heater to prevent dust from accumulating on