Golden Designs DYN-HTR-1500-200, Руководство пользователя

Страница: 4 / 13

4
Components and Functions
A. The Dynamic Infrared Heater is constructed with 1 Infrared Quartz Bulb and a 2 resistance
wire system. Air is drawn inside the Dynamic Infrared Heater, flows along the
circumference of the chamber and over the Infrared Quartz Bulb. The Quartz Bulb and
RMS system produce infrared rays that heat the air which passes through the inner
chamber.
B. An AC Cross Flow Fan pushes air over the Infrared Quartz Bulb. The Cross Flow Fan
creates a wide flow of air using a cylindrical-shaped impeller.
C. The Dynamic Infrared Heater has a Delay Start Function which controls the AC Cross Flow
Fan. The purpose of the Delay Start Function is to allow the Heating System to heat up
before the fan begins to circulate the air flow. In addition, the AC Cross Flow Fan will
continue to circulate the airflow after the power is turned off to circulate the warm air from
the Dynamic Infrared Heater cooling the unit down.
D. The LED Digital Display is a convenient, stylish, and modern way to display the set
temperature and time. This attractive addition compliments the Dynamic Infrared Heater, in
that, it simplifies and makes controlling the unit easy. Operating the heater is logical and
can be done on the unit itself or by remote.
Unpacking the Dynamic Infrared Heater
1. First, check the carton to make sure there are no obvious damages that may have occurred
during shipment.
2. Open the Dynamic Infrared Heater packaging and remove the heater by sliding it from the
box. You may want to gently and cautiously turn the entire box upside down letting the
heater slowly slide out.
3. Remove all the protective materials from the heater. It may be a good idea to keep the
protective materials and packaging for storage during the off-season.