Goldair GMH220, Руководство по эксплуатации

Страница: 7 / 12

Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. Please follow
the below instructions.
WARNING:
THIS IS A DOUBLE SIDED HEATER. Keep all objects at least 1
metre from the front, sides and rear of the appliance.
WARNING:
In order to avoid overheating or fire, do not cover the heater.
WARNING:
Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
WARNING:
Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:
Never leave this heater unattended.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off position,
insert the power plug into the mains outlet.
CAUTION:
Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket.
A partially inserted plug will overheat the plug and socket and could result in
fire.
Note: When the appliance is turned on for the first time, it may release a
slight odour or smoke. This odour or smoke is a normal occurrence caused by
the initial heating of the internal heating elements and should not occur
again.
HEATER CONTROL SWITCH
Check that the heat control switch at the back of the heater is set to Off position before
plugging the heater in and turning on the mains supply. Turn the Power Switch at the
back of the heater to the
“I” position.