Components
Before first use
Ensure any labels, tags or stickers that may be
attached to the body or soleplate of the iron are
removed.
It is normal for a small amount of smoke and
odor to be produced the first time your iron is
used, this is due to the initial heating of the
materials used to make the iron. When using the
steam function for the first time do not direct the
steam toward your garments, as there could be
debris from the steam vents that may damage
the garment.
Filling with water
WARNING: UNPLUG IRON TO FILL
We recommend the use of distilled water.
Ensure that both the variable steam button and
temperature dial are set to the minimum/low
heat position when filling.
Fill your iron only with water, do not add fabric
conditioners, starches or any other solution as
these will damage the steam mechanism.
Hold the iron in a tilted position when filling.
Use a cup or spout with a spout to fill the iron.
Life water inlet cover and fill by directing water
though the water filling inlet until the water
reaches the MAX mark (250ml)indicated on the
water tank. Never fill above this mark.
Press water tank inlet cover down until it clicks
into place.
A
Soleplate
B
Spray nozzle
C
Water fill inlet and inlet cover
D
Variable steam button
E
Spray button
F
Steam shot button
G
360
° swivel cord
H
Power on indicator light
I
Temperature dial
J
Self clean button