
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
SELF-CLEANING
The self-cleaning feature cleans inside the soleplate, removing impurities. We
recommend using it every 10 - 15 days.
Set the steam control turning switch to position “0” (no steam)
Fill the water tank to the “MAX” level.
Set the temperature control dial to full heat and wait for the pilot light to turn off.
Pull the plug out of the socket and press the self-cleaning button until the boiling
water, steam and impurities are ejected.
When the soleplate has cooled, it can be wiped with a damp cloth.
HOW TO CLEAN & STORE YOUR IRON
After using, tilt the water filling hole downward over a sink to empty the remaining
water from the water tank.
Insert the plug into the socket, and set the temperature control dial to “MAX” for 1-
2 minutes to evaporate the remaining water, unplug the iron and let it cool before
storing in an upright position.
From time to time, clean the exterior of the iron with a damp cloth and wipe dry.
If the iron has not been used for an extended period, hold the iron horizontally
and allow to steam for 2 minutes prior to ironing.