![background image](http://html.mh-extra.com/html/goldair/gd255/gd255_operating-instructions-manual_2239886006.webp)
Operating Your Dehumidifier
TIMER
Press the TIMER button to program how long until the unit turns off. From 1-24 hours.
Each press of the button will increase the time by 1 hour.
Once the time has elapsed, the dehumidifier will turn off.
If you want to cancel the timer programming, press the TIMER button until the display
reads 00.
Note: The programmed time will be cancelled if you turn the dehumidifier off manually.
The programmed time remains unchanged if the machine stops due to water full or
during defrosting.
TANK FULL INDICATOR
When the water tank is full, the tank full indicator light up, the dehumidifying operation
will stop automatically and the buzzer will beep 15 times to alert the user that the water
tank need to be emptied.
EMPTYING THE WATER TANK
Lightly press on the sides of the tank with both hands and pull the tank out gently.
Discard the collected water and reinstall the water tank.
When replacing the drainage tank, press the tank firmly into place with both hands. If
the tank is not positioned properly, the “TANK FULL” sensor will be activated, and the
dehumidifier will not operate.
If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use detergent,
scouring pads, chemically treated dust cloths, petrol, thinners or other solvents, as
these can scratch and damage the tank and cause water leakage
Do not remove the float from the water tank.
The water full sensor will no longer be able to detect the
water level correctly without the float and water may leak
from the water tank.