![background image](http://html1.mh-extra.com/html/goldair/3508w/3508w_operating-instructions-manual_2240134005.webp)
Installation Instructions
Please read these instructions and User Manual carefully.
Always choose a safe location for the heater, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. Do not dispose of packaging
until completely satisfied with your purchase.
THE HEATER MUST BE LOCKED IN PLACE ON THE WALL MOUNTING BASE BEFORE IT CAN BE
SAFELY OPERATED.
Bathroom fan heaters are only to be mounted on heat resistant walls that comply with current
AS/NZS specifications & building regulations. Use only the voltage specified on the rating label
of the appliance.
• It is illegal for persons other than those
authorised by legislation to work on the fixed wiring
of any electrical installation.
• All installations must be in accordance with the local Electrical Wiring Regulations and Wiring
Rules.
• Means for disconnection must be incorporated in the fixed wiring in accordance with the
wiring rules
CAUTION:
Do not mount directly under or above an electrical power socket. It is
recommended to install the heater to the side of any power socket
CAUTION:
The appliance is to be installed so that switches and other controls cannot be
touched by a person in the bath or shower.
NOTE:
Your Goldair Bathroom Fan Heater Wall Mount must be installed with:
•
At least 1.85m clearance from the floor.
•
At least 210mm clearance from the ceiling.
•
At least 300mm clearance on the sides.
•
At least 700mm clearance from the bottom of the heater to any obstructions, such
as other appliances, shelves and pictures.
•
At least 1.0m clearance from air outlet from any flammable material including
textiles, curtains and soft furnishings.
CAUTION:
Ensure your unit is at least 700m above any wall mounted object
–
this includes
window frames and doors
–
they may only protrude a small amount, but this can reflect
sufficient heat to cause safety devices to activate.
NEVER
install unit in a position where an open door can abut up to the front of the unit, as it
will heat up too quickly and activate the safety devices.
See installation instructions on next page.