background image

10

13. If any condition or warranty is implied into this agreement 

under the Competition and Consumer Act (2010) (Cth) or 

any equivalent State or Territory legislation and cannot be 

excluded, then our liability is limited to one or more of the 

following: 
(a) in the case of goods, the replacement of the goods or 

the supply of equivalent goods, the repair of the goods, the 

payment of the cost of replacing the goods or of acquiring 

equivalent goods, or the payment of the cost of having the 

goods repaired; 
(b) in the case of services, the supplying of the services again, 

or the payment of the cost of having the services supplied 

again. 
14. Nothing in these conditions is to be read or applied so as 

to exclude, restrict or modify or have the effect of excluding, 

restricting or modifying any condition, warranty, guarantee, 

right or remedy implied by law and which by law cannot be 

excluded, restricted or modified. 

15. Any quotes on pricing provided by us are consistent 

with the prevailing market at the time of quotation, including 

considerations as to rates of freight, insurance, customs, 

duties, exchange, shipping expenses, sorting and stacking 

charges, cartage, cost of materials and other charges affecting 

the cost of production prevailing at that date. 
16. Any increases in the quote price occurring either before or 

during the agreement, shall be to your account.
17. Our quotations are open for acceptance within the period 

stated therein. If no period is stated, our quotations are open 

for acceptance for (14) fourteen days from the date the quote 

was given.

18. All prices listed in our quotations and product catalogue are  

subject to change or alteration without notice.

19. Unless we otherwise agree in writing we accept credit card 

or eftpos payments only,.. 
20. We do not accept payment by cheque unless we have 

previously agreed in writing to do so.
21. Any goods you deliver to us must be free of any chemicals. 

If you deliver goods that are not free of chemicals, you must 

pay any costs incurred by us including the cost of our own staff 

in removing and disposing of the chemicals and cleaning the 

goods. 

22. If after 28 days of notifying you that your goods are ready 

for delivery we have received no communication from you, we 

retain any rights under the Australian Consumer Law and Fair 

Trading Act 2012 (Vic) to sell the goods to recover the value of 

any outstanding debt you may owe us. 
23. You are responsible for backing up any Data that you, 

or your agent, may install on the goods. If the Data is wiped, 

corrupted, or lost, we are not liable (whether we are negligent 

or otherwise) for any damage that may result from that Data 

being wiped, corrupted or lost. 
24. Before you use any of our goods you must check, and if 

necessary adjust, all settings to ensure the goods are properly 

calibrated. 
25. We are not liable to you for any failure by us to perform 

any of our obligations under this agreement caused by an 

impediment or circumstance beyond our control.
26.In these terms and conditions, 

(a) “we”, “us” or “our” means the entity within the Goldacres 

Group from which you purchase goods and/or services, 

including, but not limited to:

i. Goldacres Trading Pty Ltd  ACN 061 306 732; and 
ii. Goldacres Sprayer Centre Pty Ltd ACN 639 231 520
(b) “you” or “your” means the individual or company that 

purchases goods and/or services from us. 

(c) “our confidential information” includes all of our secrets, 

ideas, know how, concepts, information, copyright, computer 

programs, manuals, precedents whether in writing or in any 

other form and all other information relating to us or our affairs, 

businesses, sales, marketing or promotional information, 

and any information about the ingredients, mix, make-up or 

manufacturing process of the goods

(d) “goods” includes any associated services except where the 

context does not permit. 

(e) “Third Party Accessories” includes anything incorporated in 

the goods that is manufactured and supplied to us by a third 

party. 

(f) “Data” includes any information capable of being installed 

and/or stored on an electronic device. 
__________________ End ____________________

Содержание Squirt

























Отзывы: