background image

35

Safety

General

The following pages outline important safety 

information. At Goldacres safety is a high 

priority. These safety and warning instructions 

MUST be followed to ensure the safe 

operation of your Goldacres equipment.
Explanation of key terms used in this 

operator’s manual are:
DANGER - You will be killed or seriously hurt if 

you don’t follow instructions
WARNING - You can be seriously hurt if you 

don’t follow instructions
CAUTION - You can be hurt if you don’t follow 

instructions
NOTE - Is used to notify people of installation, 

operation or maintenance information that is 

important but not hazard related.

The Operator

All operators of this equipment should be 

adequately trained in the safe operation of this 

equipment.  It is important that all operator’s 

have read and fully understand the operators 

manual prior to using this equipment.
All new operators should be trained in an 

area without bystanders or obstructions and 

become familiar with the sprayer prior to 

operation.

Safety Precautions

DANGER

•  Cut hazard. Sharp edges. Contact may 

result in injury. Always keep body, head 

and hands away from sharp edges.

 

WARNINGS

•  Any unauthorised modifications to this 

equipment may affect its function and 

create a serious safety risk.

•  Never attempt to clean parts or nozzles, 

by blowing with mouth.

•  Never attempt to siphon chemicals, or 

substances, by sucking.

•  It is imperative that the vehicle 

manufacturer’s specifications be 

checked and all instructions for use when 

transporting, or towing, be adhered to at 

all times.

•  Water weighs 1kg per litre, however 

conversion factors must be used when 

spraying liquids that are heavier or lighter 

than water. Example: liquid urea has a 

density of 1.28 kg/L and will therefore be 

significantly heavier than water if the tank 

is filled completely. 

•  Ensure equipment is securely fastened, or 

attached, to the vehicle at all times.

CAUTIONS

•  A supply of fresh water should be with the 

equipment at all times.

•  Do not use this machine in ambient 

temperatures exceeding 40 degrees 

Celsius. 

NOTES

•  Always read and understand the 

operator’s manual prior to operation of this 

equipment. 

•  It is the responsibility of the operator to 

ensure that there are no decals missing 

from the equipment and that any damaged 

or missing decals are replaced prior to 

operation. 

•  Goldacres equipment ordered or operated, 

outside the guideline limitations may not 

be warranted by Goldacres for successful 

performance. Operators working outside 

these limitations do so at their own risk, 

unless specific advice has been sought 

from and provided by Goldacres in writing.

•  Inspect the equipment thoroughly for 

damage and wear before operation. 

•  Do not operate the equipment while under 

the influence of any drugs, alcohol or if 

excessively tired.

•  Make sure that the equipment complies 

with all relevant road regulations when 

transporting. 

•  After reading the operator’s manual if there 

is any thing that you do not understand 

please contact your Goldacres dealer or 

Goldacres.

Содержание BETA 110









































Отзывы: