Goldacres 3PL 1000L, Руководство оператора и каталог запасных частей

Страница: 11 / 60

11
General Information &
Specifications
The 3PL range is ideal for the small acreage
and hard to get areas. They can be used to
deliver water or chemical to your crops. Our
range allows you to mix and spray chemical
with multiple boom size and tank size options.
PTO shaft driven diaphragm pumps are used
to produce a high and consistent flow rate to
the booms.
These products are made with durable
industrial grade UV stabilised polyethylene
tanks.
Know Your Sprayer
Getting to know your sprayer prior to operation
is crucial in the safe and efficient operation
of this equipment. Take the time to familiarise
yourself with all the standard and optional
components fitted to your sprayer, not only do
you need to know where key components are
located on your machine you need to become
competent in the correct operation of these
components prior to spraying operation.
It is also important to become familiar with
common spraying methods and common
spraying terms prior to using this sprayer for
the first time
Chassis
The chassis is an all steel construction. The
chassis is shot blasted, primed and then
protected by the Goldacres paint process for
excellent chemical resistance and durability.
Tank
All tanks are constructed from UV resistant
polyethylene. Polyethylene tanks have a very
high chemical resistance.
Due to the rotomoulding process, there can be
a variance in the overall dimensions of the tank
which in turn results in variations to the tank
capacity. For this reason, calibration markings
should be used as a guide only.
Paint Colours
Steel work: G13 Dark Green
Pump
The pump is critical to any sprayer
performance. Correct operation and
maintenance of the pump will ensure the
sprayer is able to perform to its capabilities.
Always flush pump with clean water after every
use. Prolonged chemical contact can severely
damage valves, diaphragms and seals.
Do not leave water in pump if sprayer is to
be left in a cold environment. The water may
freeze and cause damage to pump. Empty
pump of all water and cover the pump to
ensure this situation does not arise. If this has
not been done, and there is a possibility there
may be frozen water in the pump, wait until
any ice has thawed before using the pump.
Machine limitations
All Goldacres equipment is subject to
operating limitations, it is the operator’s
responsibility to ensure that this equipment
is being operated within these limitations and
appropriately to the operating conditions at
hand.
Identification
When ordering parts or requesting service
information for your sprayer it is important to
quote the serial number and the purchase date
of your machine in order to receive accurate
information.
Serial
number
location