TROUBLESHOOTING
19
For spare parts visit the official Gold Note store at:
www.akamaiaudio.it
PROBLEM
CAUSE
SOLUTION
Levelling the turntable
Cleaning the turntable
Motor heating
Noise on startup
The turntable is not levelled
The turntable is dirty and requires
cleaning
The motor is too hot
The turntable produces a slight
rubbing noise upon startup
With a spirit level, only level the Turntable Platter
through its shelf layer eventually screwing its
feet just for very fine adjustment, take care of
levelling the platter on its vertical and horizontal
lines.
Be sure that the turntable layer is enough solid
and rigid to support the weight of the turntable
Easily.
With EXTREME care use ONLY very soft 100%
cotton cloth to sweep dust and stains out.
Any acid or not extremely soft cloth will
irreversibly damage the turntable fine aesthetic.
Do not use any alcohol to clean the turntable
anodised label, pulley and motor spindle.
Only dry cloth is allowed.
AC synchronous motors as the ones used by
Gold Note may warm up to 50° Celsius without
creating any problem.
It is normal for the belt to produce a slight noise
when starting.
Содержание VALORE 425 Lite
