The Breeze
Model No. 3030-00-000
Page 17
gmpopcorn.com
Issue
Possible
Cause
Solution
Excessive
Vibration
A.
Packing material not
removed.
A.
If the equipment is new, check that all packing
materials were removed from the machine.
B.
Lock-N-Go Handles not in
operating position.
B.
Verify that the Lock-N-Go Handles have been
rotated into the operating position.
C.
Low on sugar.
C.
Refill the floss head; this will normally
eliminate excessive vibration. When adding
sugar to the floss head, always fill it 90% full
to obtain a balanced condition in the head and
eliminate vibration.
Do
not
add
sugar
with
the
motor
running!
D.
Foreign objects or sugar
lumps.
D.
Run the sugar completely out, then check for
foreign objects or sugar lumps in the head
assembly.
E.
Stretched or uneven
suspension springs.
E.
If the suspension springs are stretched or
uneven this can cause unwanted vibrations.
Have Qualified Service Personnel replace if
needed.
Lock
‐
N
‐
Go
Handles
are
Hard
to
Rotate
A.
Clamping Cam friction.
A.
If handles are hard to move, Qualified Service
Personnel may need to apply Petro Gel (Gold
Medal Item No. 1110), or a food safe lubricant,
to the top surface of the Clamping Cam to
reduce friction where the cam contacts the
bell housing.
