Gold Medal ShaveMaster II 1005, Инструкция по эксплуатации

Страница: 3 / 13

ShaveMaster II
M
ODEL
#1005
1
HOW TO OPERATE THE SHAVEMASTER II
MAIN SHAFT
Rotates when motor is "ON".
Keep fingers away.
Step 2: HAND WHEEL
for main shaft.
Rotate to maintain
height.
Step 3: ICE COMPARTMENT
FRONT DOOR LATCH
Open door latch and place
block of ice in center, then
close and relatch door.
Step 7: ON–OFF SWITCH
Now start shaving
process here or by using
#1008 Foot Switch.
Step 6: HAWAIIAN ICE CUP
Hold Hawaiian Ice Cup an
inch or two below shaved
ice discharge area then
"shape" by hand. Always
wear food handler gloves.
Step 5: BLADE FINENESS
KNOB
Rotate to minimum
shaving height for
fine snow.
Step 4: SHAVING
PRESSURE KNOB
Rotate clockwise "finger
tight" to put pressure on
the ice block.
Step 1: LOCKING KNOB
Pull and turn to "unlock"
main shaft. Be sure the
motor is "OFF".