ReadyPop
®
Jr.
Model No.: 2783-00-000 (010, 020, 030)
Page 7
gmpopcorn.com
7.
Install the chute assembly as described below.
8.
Make sure the Corn Pans and Coil Assembly are in position for use (see image below).
9.
After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Make sure
Coil
Assembly
is FULLY
fitted on Motor Shaft.
Align
flat side of Shaft to Coil
Assembly Plate to install.
Corn Pans
(2 side pans,
1 bottom pan)
See next section for complete corn pan removal and reinstallation.
Install Chute Assembly
General images shown for reference.
1.
Insert both tabs on chute flap into
slots in cabinet.
2.
Allow flap to swing down into
place—make sure flap swings freely.
3.
Fit metal chute over the 4 threaded
studs.
4.
Install plastic chute cover and secure
with the 4 knobs provided.
Twist knobs until finger tight only.
1
2
Chute must sit flush
against cabinet.
