Gold Medal Floss-Boss 3024EX, Инструкция по эксплуатации

Страница: 4 / 16

Floss Machine
42543EX
2
Before Plugging in the Machine
Remove all padding and restraints.
Lower the shipping bracket so the bell housing "floats" freely on the springs. Unscrew
and push down the two knobs on each side of the cabinet top to lower the shipping bracket
completely.
Make sure the floss ribbon (heating element) located inside the head assembly has not
shaken out of the band during transportation. If the ribbon is out of the band, push it back
into place manually.
Controls and Functions
MAIN SWITCH
-
Turns motor "on" or "off" and supplies current to the heat switch.
HEAT SWITCH
- Turns current to the heating element (ribbon) "on" or "off."
HEAT CONTROL
-
Increases or decreases voltage to ribbon wire heating element using a gradu-
ated dial.