Nacho Cheese
Dispenser and Warmer
Model No. 5300, 5300EX
Page 7
gmpopcorn.com
INITIAL SETUP FOR PORTION CONTROL
Dispensing Volume
The dispenser/warmer is set at the factory with pre-set dispensing volume levels (manual, small
and large).
•
The Orange Switch is set to free-flow (manual), as long as button is activated the warmer
will dispense product. All dip switches on the circuit board for this Orange button are set
to “Off” for (manual) application.
•
The dip switch banks on the circuit board for the Yellow and Red Buttons are pre-set with
factory times to dispense product.
•
See Master Board Settings section (on the next page) to change the dispensing settings.
Dispensing Temperature
The dispenser/warmer is factory set to a default temperature level for warming the product.
•
To adjust the temperature setting to fit your application, the master board has an
adjustable temperature setting potentiometer located in the center of the master board
(see Page 9 for adjusting the temperature setting).
WWW.CONCESSIONSTANDS.COM
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
concessionstands.com
