Astro Pop 16 oz.
Model No. 2023E, 2023XE, 2023XEN
Page 9
www.gmpopcorn.com
10.
Dump any water remaining into a bucket (do not spill any in the interior of machine),
then wipe the kettle interior clean with a clean dry cloth.
For an extra dirty kettle, the process may be repeated; or, after turning kettle heat OFF,
allow solution to sit in kettle overnight. The next morning, finish the cleaning steps.
11.
With unit OFF and unplugged, use a clean SLIGHTLY damp cloth (wring ANY EXCESS
water from cloth before use) and wipe the kettle lead cord clean.
DO NOT get moisture
into the kettle lead-in cord, severe damage will result.
12.
After kettle cleaning, check to be sure the crossbar fasteners are securely tightened.
Daily Unit Cleaning Instructions
1.
Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2.
Remove any remaining popcorn.
3.
Remove all pans/accessories and take them to the sink to clean with soap and water,
then rinse and dry.
4.
Clean under corn pan to remove all popcorn bits and seeds with a vacuum as needed,
then wipe the area with a clean dry cloth to remove any grease.
5.
Wipe clean the area above the corn pan and exterior surfaces using a clean, SLIGHTLY
damp cloth to remove any grease from the glass and cabinet (cloth may be SLIGHTLY
dampened with soap and water, then wipe again with clean water to remove any
remaining cleaner).
6.
Clean glass panels with glass cleaner. Gold Medal Watchdog Glass Cleaner (Item No.
2588) is recommended.
Ammonia cleaners will damage plastic doors/panels. Only use a non-ammonia cleaner,
such as Gold Medal Watchdog Glass Cleaner (Item No. 2588).
7.
Reinstall the clean, dry pans/accessories.
8.
Check the kettle lead cord, make sure it is fully plugged into the kettle receptacle and
the plug (or plug collar) is fully twisted to lock it into place.
Sanitizing the Oil System (Tubing and Pump)
Reference the Oil Dispense Unit manual for oil system cleaning instructions.
