5 function keys for simple manual setting:
Operation & Setting
8
Number
+
Power on
Setting
How to do
During setting, if you heard sharp beep it
means setting is void. Please reset RE-300
again if so. Always press
“50” as confirmation button
1
Frequency
Until hearing short “beep” and let go, you will
see number “1-10” blue LED light-on. Key in
frequency and press “50” until you hear long
beeping “b-e-e-p” to save it. (Ex: 450.550 MHz,
please enter 450550. (10=0))
2
Beep on /
off
Until you see number “2” turns on. Push again
to cancel the beeping. Blue light turn on= Beep
on, Blue light turn off=Beep off (Default value:
Beep on).
3
Waiting
Time
Until hearing short “beep”, you will see number
“1, 2, 3” is on. Then pressing number 1, 2 or 3
again to set up waiting time. After determining
the number, please press “50” until you hear
long beeping “b-e-e-p” to save it. (Default value:
2 Mins.) (1=1 Min, 2=2 Mins, 3=3 Mins)
4
Erase or
Add a TB-
A06
Until hearing short “beep” and let go. All 50 blue
LED light on besides the lost or dis-link ones.
To erase them: Press numbers they belong to.
To add them back: Follow same way and to
press their number.
5
TB-A06 in
total
Until hearing short “beep” and let go, all blue
LED light on. Plese select the number key
standing out total pieces of TB-A06 you have,
then push "50" until hearing long "b-e-e-p".
