Gold Apollo AL-A28, Руководство по программированию

Страница: 19 / 28

PAGER PROGRAMMING SOFTWARE
ALA28 Programming
17
ALA28
If it is selected, then the message most length is 2,000 characters, otherwise the
length only can be 300 characters.
If it is selected, beep and vibration will active together.
If it is selected, the message will indicate the counter number at first.
If “Direct” is selected then the message will show on the display at a message
received. Otherwise it only shows a message location icon on the display.
When the paging display is “Direct”, if it is selected, the back-light will turn
on at a message received.
If it is selected, the pager emits a, low battery cell alert when the battery
reaches a low cell state.
It select the RF signal polarity is normal or invert.
With an out-of-service time specified by the code plug, the pager is considered
“out of service” when it does not detect a POCSAG synchronization word for
that time period. The out-of-service icon displays at this time. Valid selections
are: disabled, 1 min, 2 min, 5 min and 10 min.
If it is selected, the external buzzer in the charger will turn on at the same
time with the internal pager’s beep.