Gold Apollo AL-A27, Руководство по программированию

Страница: 3 / 28

PAGER PROGRAMMING SOFTWARE
Getting Started
1
ALA27
Getting Started
The ALA27 Pager Programming software, provides the flexibility to program
ALA27 pagers to meet individual requirements. To obtain the best results
from the product, please take a few minutes to read this instruction guide.
Equipment Required
To install and operate the programmer, you need a system that meets the
following minimum requirements:
An personal computer (PC) with printer port, or compatible
Windows 98 SE or above operating system (XP Recommended)
256 MB of RAM
ALA27 Programmer
A DB25 male-male printer cable
ALA27 Pager Programming Software
Equipment Setup
Refer to Figure 1 while performing the follows:
1. At the rear of the PC, connect the DB25 male-male interface cable to
the printer port on your computer.
2. Plug end of the DB25 cable into the ALA27 programmer.
3. Hardware installation is complete.