54
3. Mark checkbox in front of Test.
4. fill in the SMTP server and Port
NOTE: Use port 465 for “SSL” connection.
5. Fill in UserName, Password, Sender, Recipient, email Subject:
NOTE: The username and sender are full email account, such as
6.
Click the “Test”.
NOTE: The system may still show “failed” even the email setting has been done correctly. If you are sure
about your email setting, just ignore the warning message.
Important: The DNS setting should be configured correctly, otherwise the camera will not send the email out.
Refer page-6 about how to configure network setting manually.
Enable Snapshot
1. In the "Main"
, Enter the “Device Config”, Click icon “snap Config”
2.
Click “Auto”, then click “OK” to save
Содержание 2643-62
Страница 69: ...69 Copyright GOLBONG 2017...
