Leak alarm type LWG 2000
6 / 16
part no. 15 073 57 c
ASSEMBLY
Before assembly, check that the product is complete and has not suffered any damage during
transport.
ASSEMBLY must be carried out by a specialised company.
See USER QUALIFICATION!
The specialised company and the operator must observe, comply with and understand all of
the following instructions in this assembly and operating manual. For the system to function
as intended, it must be installed professionally in compliance with the technical rules
applicable to the planning, construction and operation of the entire system.
Example of application - LWG 2000 leak alarm with four possible installation situations
for a probe.
Probe in each tank with integrated containment basin of a battery tank system.
Probe on the floor of the installation room to monitor flooding and/or to monitor the
containment facility for leaking fuel in a hidden area.
Probe in the containment basin of an oil pump.
Probe in the containment basin of a consuming device to monitor the pressure line.
Alternatively, up to five probes can be connected simultaneously to the LWG 2005 leak alarm.
