Goji GINMBT19, Инструкция по эксплуатации, Страница: 10 / 16

10
Bluetooth Pairing
You may increase/decrease the volume of the
connected device for desired volume level.
1. Ensure the earphone is switched off.
2. Press and hold for 5 seconds to enter Bluetooth
pair mode. The red and blue indicator starts flashing
rapidly and alternately.
If no Bluetooth device is paired in about
2.5 minutes, the earphone will switch
into Standby mode, and then switch off
automatically after another 6 minutes.
3. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select “GINMBT19”.
4. If necessary, enter the passcode, “0000”, to pair and
connect the earphone. Some device also ask to
confirm the headset connection after paring.
5. The blue indicator will blink and the earphone will
voice prompt after you have successfully paired the
earphone.