Gogo ES 8, Руководство пользователя

Страница: 36 / 43

36
www.pridemobility.com Go-Go ES8
To check a fuse:
1. Remove the fuse by pulling it out of its slot.
2. Examine the fuse to be sure it is blown. See
figures 26 and 27 .
3. Insert a new fuse of the proper rating.
WARNING! The replacement fuse
must exactly match the rating of
the fuse being replaced. Failure to
use properly rated fuses may cause
damage to the electrical system.
What if the Travel Scooter’s batteries won’t charge?
Check the fuse located on the underside of the tiller console. Replace if necessary.
During the charging process, if the charger LED’s never indicate a full charge, check the fuse located
on the underside of the tiller console. Replace if necessary.
Ensure both ends of the charger power lead are inserted fully.
Ensure both battery harness and the front-to rear cable are inserted fully into their mating plugs.
If the tiller console fuse continually blows, contact your authorised Pride Dealer for service.
What if my Travel Scooter does not move when I press the throttle control lever?
When the manual freewheel lever is pushed forward, the brakes are disengaged and all power to the
motor/transaxle assembly is cut.
Pull back on the manual freewheel lever, turn the Travel Scooter off, and then back on to return to
normal operation.
What if the main circuit breaker repeatedly trips?
If the main circuit breaker trips repeatedly, see your authorised Pride Dealer for service.
Charge the Travel Scooter’s batteries more frequently. See IV. “Batteries and Charging.”
If the problem continues, have both of your Travel Scooter’s batteries load tested by your authorised
Pride Dealer.
You may also perform the load test yourself. Battery load testers are available at most automotive parts
stores. Follow the directions supplied with the load tester.
See IV. “Batteries and Charging” or the “Product Specifications” insert for information about your
Travel Scooter’s battery type.
What if the battery condition meter dips way down and the motor surges or hesitates when I press
the throttle control lever?
Fully charge your Travel Scooter’s batteries. See IV. “Batteries and Charging.”
Have your authorised Pride Dealer load test each battery.
See the previous troubleshooting question for load testing the batteries yourself.
If you experience any problems with your Travel Scooter that you are not able to solve, immediately
contact your authorised Pride Dealer for information, maintenance and service.
V I I I . B A S I C T R O U B L E S H O O T I N G
Figure 26. Working Fuse
Figure 27. Blown Fuse
(Replace)