Gogo ES 8, Руководство пользователя

Страница: 25 / 43

25
Go-Go ES8 www.pridemobility.com
Follow these easy steps to charge your batteries safely:
1. Position your Travel Scooter close to a standard
electrical outlet. See figure 14 and 14A.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is in the
drive (rearward) position.
4. Plug the charger power lead into the charger power lead
receptacle on your Travel Scooter, then into the electrical
outlet. We recommend that you charge the batteries for 8
to 14 hours.
NOTE: The LED lights on the charger indicate different
charger conditions at various times: charger power on,
charging in progress and charging complete. Refer to the
operating instructions supplied with the charger for a
complete explanation of these indicators.
5. When the batteries are fully charged, unplug the charger
power lead from the electrical outlet and then from the
charger power lead receptacle.
NOTE: There is a charger inhibit function on your Travel
Scooter. The Travel Scooter will not run and the battery
condition meter will not operate while the batteries are
charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your Travel Scooter’s battery voltage is low, the charger works harder, sending more electrical
current to the batteries to bring up their charge. As the batteries approach a full charge, the charger sends
less and less electrical current. When the batteries are fully charged, the current sent from the charger is at
nearly zero amperage. Therefore, when the charger is plugged in, it maintains the charge on your Travel
Scooter’s batteries, but does not overcharge them. We do not recommend that you charge your Travel
Scooter’s batteries for more than 24 consecutive hours.
What if my Travel Scooter’s batteries will not charge?
Ensure that the fuse on the tiller console is in working condition. See figure 6 .
Ensure both ends of the charger power lead are inserted fully.
Can I use a different charger?
Chargers are selected precisely for particular applications and are especially matched to the type, size
and chemical formulation of specific batteries. For the safest and most efficient charging of your
Travel Scooter’s batteries, we recommend use of the charger supplied as original equipment with your
Pride product only. Any charging method resulting in batteries being charged individually is
especially prohibited.
Figure 14A. Charging The Batteries (15 Ah)
I V . B A T T E R I E S A N D C H A R G I N G
Figure 14. Charging The Batteries (10 Ah)