ENG - 30
Preservation of recordings
- To prevent accidental erasing of a cassette, simply break off the two plastic tabs located on
the cassette tape’s rear edge.
- When a cassette with removed plastic tabs is inserted, the recording button cannot be
pressed.
- If a cassette is to be erased and re-recorded at a later stage, simply cover the holes on the
cassette where the tabs were removed, with a piece of strong adhesive tape.
Specifications
Power supply :
AC 230V ~, 50Hz
DC 9V
(6 x C-cell/ UM-2/ LR14 size)
(Batteries not included)
Power consumption :
15 W
Output power per chanel :
1,5 W
Frequency :
AM 530 – 1600 khz
FM 88 – 108 mhz
Caution:
The apparatus should not be exposed to dripping or splashing
And no objects filled with liquids should be placed on the apparatus.
The marking and rating label is located at rear enclosure of the apparatus.
The mains plug is used as the disconnect device and it shall remain readily operable. To be
completely disconnected the power input, the mains plug of the apparatus shall be discon
-
nected from the mains completely. The mains plug
Should not be obstructed or should be easily accessed during intended use.
Under the influence of electrostatic phenomenon, the product may malfunction and user to
power reset.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Caution:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
-
-
-
-
-
-
-
-
-
-
Содержание CDM699
Страница 32: ......
