GoFish GoFish Cam, Руководство пользователя, Страница: 9 / 41

Check before using underwater
Do not attach/remove the Rear Cap or lens cap in sandy or dusty locations, near
water, or with wet hands. If sand or dust adheres to this unit, water may leak in.
Step 1: Rotate the Rear Cap and lens cap in the directions of the arrows to remove
them.
Figure 1
Step 2: Check that no foreign objects are found on the internal components, threaded
portions, and rubber seals of this unit.
● If there are any foreign objects, such as lint, hair, sand, etc., water will
leak within a few seconds causing malfunction.
● If there are foreign objects adhering to the unit like dust or lint, remove it
with a dry, soft cloth.
● If there is any liquid, wipe it off with a dry, soft cloth.
● If there are foreign objects that cannot be reached or removed with a dry,
soft cloth - use a commercially available air blower (or compressed air
can) to remove them.
Step 3: Check that the rear cap, lens cap, and rubber seals are neither cracked nor
deformed.
Step 4: Rotate the rear cap and lens cap in the OPPOSITE direction as used in Step 1.
Tighten, them firmly to ensure that they are not loose and no gaps between
caps and housing body are present.